Close
Sie haben keine Artikel im Warenkorb.
Suchen

Dual H-Bridge - ECUMaster

Hersteller: ECUMaster
Artikelnummer: EM-DUAL-H-BRIDGE
247.11 EUR
Incl. 0% VAT (United States) | Ändern
247.11 EUR excl. VAT

The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.

Verfügbarkeit: Nicht mehr verfügbar - Wenn bestellt, wird es versendet, sobald es verfügbar ist (7-10 days).
+ -

The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.

Device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.

Voltage range: 6V - 28V (12V and 24V automotive installations)

Output current: 10A continuous, 30A peak

4 analogue (0-5V) / digital (35Hz - 200Hz PWM) inputs

Output PWM: 12bit 3.9kHz

The device can be used to supply protected low side (GND) or high side (VBat) supply independently to each of 4 outputs for bidirectional DC motor control. Low side output can be PWM modulated on per bridge basis. Common use cases can be:

  • Electric windows controller
  • High current electronic throttle body amplifier
Beliebte Begriffe
Benutzer, die diesen Artikel gekauft haben, haben auch gekauft

CAN-bus keyboard - ECU Master

164.47 EUR

ADU 5" (Advanced Display Unit) - ECU Master

ECUMasters advanced Display Units are available in 5'' and 7'' versions. Featuring a high resolution, high visibility anti-glare screens, these guarantee perfect visibility even in adverse weather conditions. 

908.26 EUR

Loom A 400mm ‐ All wireIn ECUs #0LA - Link

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs

Perfect for all custom wiring jobs utilizing Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are color-coded to match the manual. This loom is also available in 2.5m and 5m lengths.

82.00 EUR

Loom B 400mm ‐ All wireIn ECUs, not required for Atom #0LB - Link

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs

Perfect for all custom wiring jobs utilizing Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are color-coded to match the manual. This loom is also available in 2.5m and 5m lengths.

82.00 EUR