Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.
Primarily designed to be connected directly to MaxxECU, but obviously, work with other systems as well.4.7 mm thickness of the sensor.Reaction time: 1250ms-100 to 1300 degrees Celsius (-148 to 2375 F)Covered sensor tip. May be needed with ALS and some race E85 fuels.
For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not over tightened.
At CBS Racing, happy and satisfied customers are our top priority. We do not hide behind supplier or manufacturer warranty statements like: "No warranty on racing products". This is not okay! There must be a guarantee and a warranty on all products sold - they must work and fit your car as advertised.We take great care in selecting what we sell and what we install on our build- and customer cars. So you can rest assured we got your back, and we will not leave you stranded with a bad or broken part.At CBS Racing, we strive to be the first shop of choice for our fellow car enthusiasts!And we plan to do that by taking care of our customers the way they deserve and deliver 110% service, always!Thanks for trusting us!
Connector 3-socket housing for eg Honeywell sensor, including pins and seals.
74mm Bore sizeDual potentiometer redundancyOE quality and performanceIncludes groove on inlet port flangeUse mating connector D 261 205 358-01
3SGTE/MAZ, ID1300X Injectors -14mm Top Adapter (Grey) - 14mm (Silver) Lower O-Ring - Set Of 4
Pressure sensor -1bar to 9bar. 0-5v output. +5 V supply from the ECU.NPT 1/8 thread. Support for this sensor in MaxxECU.Resistant to oil, gasoline. (seems to work with ethanol, but the sensor is not specified for it) Genuine Honeywell industry sensors.
