MaxxECU 8HP (GEN1) cable harness (BMW 8HP shifter)
For the 8HP (GEN1) gearbox TCU to be used with MaxxECU 8HP (GEN1) CAN control.
Made to fit the BMW 8HP shifter with the 10-pin connector, if using another CAN shifter, the connector needs to be cut and changed.The OBD connector is there for future flash/tuning purposes.1800mm between the shifter and the GT150 connector.2100mm between the 8HP connector and the GT150 connector.NOTE: the image shows the DODGE shifter.
At CBS Racing, happy and satisfied customers are our top priority. We do not hide behind supplier or manufacturer warranty statements like: "No warranty on racing products". This is not okay! There must be a guarantee and a warranty on all products sold - they must work and fit your car as advertised.We take great care in selecting what we sell and what we install on our build- and customer cars. So you can rest assured we got your back, and we will not leave you stranded with a bad or broken part.At CBS Racing, we strive to be the first shop of choice for our fellow car enthusiasts!And we plan to do that by taking care of our customers the way they deserve and deliver 110% service, always!Thanks for trusting us!
90105-10294 - Hexagon bolt for drive plate setting
GM LS GEN III/IV - Terminated Engine Harness including MaxxECU RACE kit
VAG coil shorter model. 27mm shorter than the standard VAG coil
Connector for VAG coil including rubber sleeve, terminal and cable seal.
