Close
Votre panier est vide.
Rechercher

TH04SD1 - Hyper Single Hyper Series - EXEDY

Fabricant: Exedy
SKU: TH04SD1
1103.48 EUR
Incl. 0% VAT (United States) | Modifiez
1103.48 EUR excl. VAT

TH04SD1 - Hyper Single Hyper Series - EXEDY

 

Disponibilité: En rupture de stock - If ordered, it will be dispatched once available (3-7 days)
+ -

Hyper Single Clutch
Sprung Center Disc
Pull Type Cover
For use w/ Hyper Accessory Kit TYAK102

 

Specs

 

Clamp Load 2652
Disc Diameter (Inches) 8.9
Disc Diameter (Millimeters) 225
Kit Contents CH10S, DH07D, FH13, BS03
Spline Count 21
Spline Size (Inches) 1-3/16
Spline Size (Millimeters) 29.8
Torque Capacity (ft/lbs.) 340

 

 

All Fitments

 

 
TOYOTA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
1991 - 1992 SUPRA ALL ALL ALL ALL ALL ALL w/ 1JZGTE Swap

Also fitting: Chaser JZX90, JZ100; Cresta JZX90, JZ100; Mark II JZX100, JZ110; Soarer Z30

 

Product Description

The EXEDY Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover. Additionally, the pressure plate features a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.

All Hyper Single clutches come with a chromoly steel flywheel and are normally supplied with a 6-puck cerametallic facing and a spring center damper disc assembly. However, on select vehicles, the new VF (Various Friction) disc may be offered. The chromoly flywheel is lighter than OEM for improved engine response and a lighter overall assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting, and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and higher than other single disc clutches.

6-Puck Cerametallic Disc
High friction coefficient, low wear, and a special heat resistant material [T5001] have been applied to enable the clutch size to be reduced which in turn lowers mass inertia and improves shift responses for faster gear changes, particularly in racing applications. Durability is improved with the use of a stronger, smaller damper disc, designed especially for the Hyper Single clutch.

VF (Various Friction) Disc
The VF enables the driver to operate the clutch through an easy-to-feel half engagement thanks to the Ultra Fiber friction material all while having a high heat dissipation and torque capacity due to the integrated metal facing. Furthermore, pedal effort has been drastically reduced and improved by the re-engineering and re-designing of the engagement point with newly developed cushioning plates.

All EXEDY Racing Hyper Single Series Clutch Kits carry SFI 1.1 Certification. This means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

PLEASE NOTE: All referenced torque ratings are measured at the wheels.

Tags du produit