Angle kit for Lexus 2IS/3GS 70 degrees.
Angle kit for Lexus 2IS and Lexus 3GS (ISF, IS220, IS250, IS300, IS350, GS300 GS430, GS450H, GS350, GSF, GS460)
This is fully adjustable in the following ways:
- Adjustable Ackermann
- Adjustable bump stops (eccentric bushings)
- Adjustable camber
- Adjustable caster
- 3 Shock mounting positions (different leverage / effective spring rates )
- Original Swaybars or Original fit upgraded swaybars can be used
Kit includes:
x2 Knuckles
x2 Adjustable lower arms
x2 Rear lower bushing for lower arms
x2 Adjustable upper arms
x2 Tie rods with tie rods ends
x1 Ackermann kit (24 locking plates)
- set of bolts
The kit uses the original 4 bolt wheel-bearing cartridges which include a wheel speed sensor. Check related products below.
The total width from the hub-to-hub surface is:
184cm (**Around 200cm outside tire to outside tire depending on wheel size)
Recommended wheel setup is:
8,5J - ET 35
18" or 17"
235 tires
The barrel of the wheel can not go further inwards than this if you use a different wheel size, you can check this using https://www.willtheyfit.com/
