The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Voltage range: 6V - 28V (12V and 24V automotive installations)
Output current: 10A continuous, 30A peak
4 analogue (0-5V) / digital (35Hz - 200Hz PWM) inputs
Output PWM: 12bit 3.9kHz
The device can be used to supply protected low side (GND) or high side (VBat) supply independently to each of 4 outputs for bidirectional DC motor control. Low side output can be PWM modulated on per bridge basis. Common use cases can be:
At CBS Racing, happy and satisfied customers are our top priority. We do not hide behind supplier or manufacturer warranty statements like: "No warranty on racing products". This is not okay! There must be a guarantee and a warranty on all products sold - they must work and fit your car as advertised.We take great care in selecting what we sell and what we install on our build- and customer cars. So you can rest assured we got your back, and we will not leave you stranded with a bad or broken part.At CBS Racing, we strive to be the first shop of choice for our fellow car enthusiasts!And we plan to do that by taking care of our customers the way they deserve and deliver 110% service, always!Thanks for trusting us!
ECUMasters advanced Display Units are available in 5'' and 7'' versions. Featuring a high resolution, high visibility anti-glare screens, these guarantee perfect visibility even in adverse weather conditions.
0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are color-coded to match the manual. This loom is also available in 2.5m and 5m lengths.
0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilizing Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are color-coded to match the manual. This loom is also available in 2.5m and 5m lengths.
