CBS Racing now hiring: Experienced Welder / Fabricator. For more info, CLICK HERE.

Close
Votre panier est vide.
Rechercher

Aharon LED High beam projector - Retrofitlab

Fabricant: Retrofitlab
SKU: 861 {1.13.03}
74.95 EUR
Incl. 0% VAT (United States) | Modifiez
74.95 EUR excl. VAT

Aharon LED High beam projector - Retrofitlab

Disponibilité: En rupture de stock - If ordered, it will be dispatched once available (3-7 days)
+ -
More light…Sometimes extra light is wanted when you are driving dark roads. And although high beam from halogen or bi-xenon is not bad, sometimes you just want more!

You can use some better halogen bulbs, or maybe even some LED bulbs, but the improvement and upgrade in looks will be mediocre. An ultimate upgrade would be a quad projector setup, but that’s a lot of work and a bit expensive.
So we were looking for a cost effective way to improve high beam and of course make use of modern LED technology because it hasn’t any start-up time and reaches full strength at the moment high beam is activated.

We found it! It was a challenge but we have found an amazing solution to improve your high beam. We want to introduce to you, the Aharon LED high beam projector. Better than plug-and-play LED bulbs and cheaper than a full quad xenon or bi-led setup.
Why better than plug-and-play LED? Because the light output is higher and the light is more focused where you want it. And because you can use it in combination with shrouds, it looks like a high class quad setup.

Light output Most important benefit first, you want to upgrade your high beam because you want more light. And we can guarantee you, this projector is what you want! Of course, we tested the projectors and measured the light output ourselves. And the 25 watts High power LED’s are quite an improvement. The High Power LED’s are kept cool by a fan to ensure maximum light output and problem-free operation.

Installing The only thing is you need to open your headlight. But because you are probably already going to open it to add an Aharon bi-xenon projector, this shouldn’t be a problem. Furthermore mounting is easy because of the threaded shaft. It fits H7 / H4 bulb holes and mounting hardware is included. When you want to install it in for example the BMW E46, you need to trim the E46-r shroud a bit to make the shroud fit the reflector.

Looks We do care about the looks and the combination of the projectors with a shroud looks pretty cool. Plus! there is also the option to use the projector in a DRL mode which activates a low-power DRL.

After all this, you can understand we are quite excited about the Aharon LED high beam projector. So when you want to have extra light and an improved high beam, don’t hesitate, the Aharon high beam LED projector is the latest and best option for you.

Dimensions
Width/diameter ~ 79 mm
Mounting depth ~ 66 mm
Threaded shaft Length ~ 18 mm
Total length ~ 93 mm

These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

The product images shown are for illustration purposes only and may not be an exact representation of the product. Actual products may vary due to changes in manufacturing/product enhancements.
The product/kit pictures can differ from what you have received/will receive because we use generic pictures for the kits. Because with all the different options/product changes etc. it's nearly impossible for us to take pictures for all the kits we have and with all the different options. For example, butyl sealant can be shown in the picture, but with headlights that are originally sealed with butyl, it won't be in the kit.

Spécifications des produits
Product Type Retrofit components
LED LED high beam projectors

At CBS Racing, happy and satisfied customers are our top priority.

We do not hide behind supplier or manufacturer warranty statements like: "No warranty on racing products". This is not okay! There must be a guarantee and a warranty on all products sold - they must work and fit your car as advertised.

We take great care in selecting what we sell and what we install on our build- and customer cars. So you can rest assured we got your back, and we will not leave you stranded with a bad or broken part.

At CBS Racing, we strive to be the first shop of choice for our fellow car enthusiasts!
And we plan to do that by taking care of our customers the way they deserve and deliver 110% service, always!

Thanks for trusting us!

Entrez votre propre avis Close Review Form
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
*
*
Mauvais
Excellent
*
*
*
*
Tags du produit