Close
You have no items in your shopping cart.
Search
Picture for category Engine Control Units (ECU)

Engine Control Units (ECU)

Select Subcategory

An engine control unit (ECU) is an electronic control unit that manages the engine of a vehicle.
It receives input from sensors on the engine and vehicle, and uses that data to control various systems such as fuel injection, ignition timing, and emissions control.

Here you can find: knock sensors, acceleration sensors, IGBT drivers, PMW module kits, WBO modules, ecu's, lambda sensors, battery isolators, crimping tools and mounting brackets.

3 Items in Grid 4 Items in Grid List

8X EGT CAN BUS Module - ECUMaster

With this module, it is possible to connect 8 exhaust gas temperature sensors with Can Bus with the Ecumaster EMU.

This module is connected true the Can Bus communication port.

123.14 EUR

EDL-1 Datalogger - ECUMaster

THE DATALOGGER for EMU CLASSIC and EMU BLACK is capable of recording all log channels (the same as on PC) with 25Hz on SDHC card (4GB or bigger required)
Points to note with our logger is that it is capable of recording 11 hours data per 1GB.

98.35 EUR

Connector Set EMU - ECUMaster

The connectors are there to install easily and quickly the EMU.

14.05 EUR

DBW Module - ECUMaster

DBW Module is used to operate the electronic throttle device of the EMU

119.00 EUR

Rotary Switch - ECUMaster

Rotary Switch

20.66 EUR

Box 2-Channel Common Rail - ECUMaster

Box 2-Channel Common Rail - ECUMaster

98.35 EUR

Haldex Drag Controller - ECUMaster

Haldex Drag Racing Controller is an essential device for every competitor using a car equipped with a Haldex 4Motion system in drag racing.

230.58 EUR

CAN Switchboard - ECUMaster

A CAN switchboard is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches, and indicators.

111.57 EUR

Wire Set DET 3 - ECUMaster

Pigtail wiring loom for the Ecumaster DET3

15.70 EUR

EMU Mounting Bracket - ECUMaster

EMU Mounting Bracket

24.75 EUR

Wheelspeed To Can Module - ECUMaster

The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS.

247.11 EUR

CAN IR Temperature Camera - ECUMaster

New thermal cameras, delivering real-time, precise contactless temperature readings. Measured data is sent over CAN BUS and can be recorded and displayed by other devices (e.g. ADU)

247.11 EUR

Filter by:

Clear All
Close
Min: 0.00 EUR Max: 2562.00 EUR
0 2562