Electronics & Wiring
Check out our range of: engine control units, boost controllers, digital dash displays, gauges, ABS and traction control, power management, ignition, switches, relays, wiring and harness building, electrical tools, waterpumps, ecu harnesses adapters and connectors.
Battery Isolator - AS Radlok - ECUMaster
Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown.
EDL-1 – Preterminated Harness With Plug - ECUMaster
EDL-1 – Preterminated Harness With Plug - ECUMaster
Battery Isolator M8 Ring Terminal - ECUMaster
Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown.
Digital Gear Display - ECUMaster
The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional) shift light - these two pieces of information are the most important for racing drives.
Dual H-Bridge - ECUMaster
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
CAN IR Temperature Camera - ECUMaster
New thermal cameras, delivering real-time, precise contactless temperature readings. Measured data is sent over CAN BUS and can be recorded and displayed by other devices (e.g. ADU)
