Custom firmware increases the clutch pressures from 15.5bar to 17.5bar which therefore increases the transferred torque.
Cable harness for the BMW DCT 7-speed dual-clutch gearbox (GS7D36SG) and BMW m3 gear stick, drive logic button, all wired to ANY MaxxECU unit.
Liquid pressure and temperature sensor (10bar / 140 deg C)
M10x1.0 thread.
Intake temperature sensor (IAT) HV 1/8 NPT
Air Temperature Sensor which uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with a blue insulating lacquer.
Adapter 3/8 inch Fuel Line to AN6 (ethanol sensor)
Adapter 3/8 inch Fuel Line to AN8 (ethanol sensor)
Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.
For own manufacturing of wiring harness.
Fits connector 1 on STREET/SPORT/RACE/PRO.
NOTE: Special crimping tool is needed!