G4+Force Force GDI WireIn ECU - Link

G4+ FORCE GDI

The Force GDI is our first ECU built specially to control Gasoline Direct Injection engines.

As well as full GDI control, the Force GDI offers on-board digital wideband, E-throttle control, high voltage injector and high pressure fuel pump management, plus all the other features you have come to expect from one of Link’s world-leading ECUs.

The Force GDI can control up to 4 cylinders with direct injection.

SPEC OVERVIEW:

Inputs

• 8/10* x Digital inputs
• 4 x Temperature inputs
• 11 x Analog inputs
• 2 x Trigger inputs
• 2 x Knock inputs
• 1 x LSU 4.9 Wideband lambda sensor input
• *2 inputs required when using 2nd CAN Bus

Outputs

• 4 x High voltage injector drivers (60V 10/5A Peak/Hold Current)
• 1 x GDI pump/Spill valve driver (11.8/6A Peak/Hold)
• 4 x Ignition drivers
• 10 x Auxiliary outputs^
• +5V Sensor power supply
• +8V Sensor power supply
• ^unused ignition drives can be used as additional Aux outputs

Communications

• 2* x CAN bus
• 1 x Serial (RS232) connection
• 1 x USB tuning connection

Physical

• Dimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms)
• Mass: 680grams

Advanced features found only on the Force GDI:

• 4 high voltage Boost/Peak/Hold GDI injector drives, user-definable voltage, current and durations.
• 1 Spill valve/GDI pump driver, peak & hold or saturated mode. User-definable current.

What's in the box?
Supplied with USB tuning cable and mounting bracket. Requires “A” & “B” looms or “A” & “B” connector kits.