This kit is compatible with the FCST-X models and RA Series fuel cells listed below. It can also be used on other brands of fuel cells that will accept an FCST-X as long as the minimum depth is 10.8 inches.
FCST-X MODELS
- RADIUM 20-1990-00 FCST-X
- RADIUM 20-1990-01 FCST-X
- RADIUM 20-1990-02 FCST-X
- RADIUM 20-1990-03 FCST-X
- RADIUM 20-1991-00 FCST-X(1)
- RADIUM 20-1992-00 FCST-X
- RADIUM 20-1992-01 FCST-X
- RADIUM 20-1992-02 FCST-X
- RADIUM 20-1992-03 FCST-X
(1)20-1991-00 (for Bosch BR540 or DW400) requires additional fittings: Radium P/N: 14-0691. The quantity needed is directly related to the amount of the fuel pumps installed into the fuel surge tank.
Not compatible with any Radium FCST not listed
FUEL CELLS
- Radium 20-0614 R14A Fuel Cell, 14 Gallon
- Radium 20-0622 R22A Fuel Cell, 22 Gallon
- FCST-X Compatible fuel cells with 10.8" minimum depth
Not compatible with R06A, R10A, R11A Radium fuel cells
OVERVIEW
This extension kit permits an additional 1.2 liters of volume for the fuel surge tank found in many FCST-X (10yr special edition). This also lowers the 1-way fill valves for increased fuel starvation protection at low fuel levels. The anodized aluminum canister secures between the top plate and the existing surge tank canister. Because it is 3.7in taller, it is not compatible with shallow fuel cells. A longer stainless steel pump bracket replaces the existing pump bracket.
Radium Engineering does not assemble these when purchasing an FCST-X. This kit must be installed by the end user.
INCLUDED
- Anodized aluminum canister
- Stainless steel pump bracket
- Large ID fuel pump tubing
- Small ID fuel pump tubing
- Submersible fuel hose
- Stainless steel hardware
The included parts are shown in blue in the diagram below.
