Exhaust gas temperature sensor 1.8m 4.7mm covered tip - MaxxECU

Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.

Primarily designed to be connected directly to MaxxECU, but obviously, work with other systems as well.
4.7 mm thickness of the sensor.
Reaction time: 1250ms
-100 to 1300 degrees Celsius (-148 to 2375 F)
Covered sensor tip. May be needed with ALS and some race E85 fuels.

For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.
For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.

What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not over tightened.