Nuke Fuel Surge Tank 3.0 liter for internal Deatschwerks 200 / 300 / 400

Includes:
Nuke Fuel Surge Tank 3.0 liter for internal Deatschwerks 200 / 300 / 400 (+ 5x 3/4 AN8 and 1x 3/4 plug fittings)

-------------------------------------------------

Nuke Performance 3.0 liter Fuel Surge Tank is market leading with top quality combined with outstanding performance.

The 1G Fuel Surge Tank is available for listed internal fuel pumps:

• 1 - 2 x Bosch 040
• 1 - 2 x Deatschwerks 200 / 300 / 400
• 1 - 2 x Walbro GSS341 / GST450
  

This FST includes everything needed to choose if you want to go with single or dual configuration. 

Designed and manufactured to handle extreme amounts of power with the same hallmark as all of Nuke Performance products.

With Nuke Performance's Fuel Surge Tank, you minimize the risk of fuel starvation when running at low fuel levels, that the system does not cope with the extremely hard driving such as drifting, drag racing and track days where you can exceed 2g, which could result in fuel loss.

The FST works as a buffer so the fuel pumps are always supplied with fuel for high outputs.

Nuke Performance's Fuel Surge Tank is available in several different setups, each one designed to perform to the maximum, either with internal fuel pumps or external fuel pumps.

Use to advantage one of Nuke Performance's kits which we adapted for some of the most widely used fuel pumps on the market, fuel pumps that match the high quality we seek.
With these kits, the fuel is delivered with minimum flow loss or starvation.

Delivered with stainless-steel mounting plate for easy mounting and 5x 3/4 AN8 fittings for all the top cover connections and 1x 3/4 plug if you choose to use it for a single fuel pump. 3/4 AN6-AN10 is optional and are sold separately.
No fuel pumps are included.

Designed to stand up to the destructive properties of alcohol fuels, including methanol and ethanol.

For use on turbo-charged, super-charged and Naturally aspirated engine applications.

--------------------------------

Technical information :
• CNC manufactured from aluminium alloy 6063.
• Stainless steel bolts for long lasting.
• Holds a volume of approximately 3 liters.
• Delivered with 5x 3/4 AN8 and 1x 3/4 plug fittings.
• 3/4 UNF Ports, available to AN-6, AN-8 or AN-10 line.
• Laserengraved.

Measurements :
Height : 255 mm *
Diameter : 148 mm
Weight : 2950 g

* All measurements excluding the supplied fittings.