Take a look at our wide range of digital gauges.
Pressure sensor 10bar 1/8 NPT 27 0-5v (only air, no vacuum) - MaxxEcu
Pressure sensor 0bar to 10bar. 0-5v output. +5 V supply from the ECU.
NPT 1/8 thread. Support for this sensor in MaxxECU.
Only dry air! Genuine Honeywell industry sensors.
Does NOT work with petrol, oil or Ethanol/methanol
Pressure sensor 700kPa 1/8 NPT 27 (MAP-sensor) - MaxxEcu
Endast luft. measures 0 - 689kPa --> 0- 6bar of boost.
Intake temperature sensor (IAT) 1/8 NPT - MaxxEcu
Calibration:
0deg C = 9.256ohm
150deg C = 46.7ohm
Temperature sensor 1/8 NPT CLT (water / oil) - MaxxEcu
Calibration:
-20deg C = 15.462ohm
130deg C = 89ohm
MAP Pressure/ Temperature Sensor - Bosch – Discontinued
Bosch 2010 Volkswagen Golf TDI 2.0L / 09-10 Volkswagen Jetta TDI 2.0L Low Pressure Sensor
CAN Gauge OLED 52mm (*CANGAUGE) - Link
The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters such as boost pressure, air/fuel ratio, coolant temperature, fuel pressure, ethanol content, etc. can be displayed.
52mm Can Bus Gauge (MFD15 Gen2) - MaxxEcu
52mm Can Bus Gauge (MFD15 Gen2)
Standard 52mm (1.5 inch) round instrument (like VDO displays), OLED display.
