An engine control unit (ECU) is an electronic control unit that manages the engine of a vehicle.
It receives input from sensors on the engine and vehicle, and uses that data to control various systems such as fuel injection, ignition timing, and emissions control.
Here you can find: knock sensors, acceleration sensors, IGBT drivers, PMW module kits, WBO modules, ecu's, lambda sensors, battery isolators, crimping tools and mounting brackets.
Bluetooth CAN BUS Module - ECUMaster
Wireless communication module to connect with mobile phones to ECU MASTER EMU.
With this Bluetooth module, it's possible to connect your mobile or tablet device to the ECU MASTER EMU.
Only compatible with Android.
This module is connected true the Can Bus communication port.
8X EGT CAN BUS Module - ECUMaster
With this module, it is possible to connect 8 exhaust gas temperature sensors with Can Bus with the Ecumaster EMU.
This module is connected true the Can Bus communication port.
EDL-1 Datalogger - ECUMaster
THE DATALOGGER for EMU CLASSIC and EMU BLACK is capable of recording all log channels (the same as on PC) with 25Hz on SDHC card (4GB or bigger required)
Points to note with our logger is that it is capable of recording 11 hours data per 1GB.
Inserts CAN-BUS Keyboard - ECUMaster
CAN keyboards in completion to our range of product, we can also offer CAN-bus based keyboard (available in few different keys pattern)
Built-in LEDs are indicating the buttons' state (red, green, orange) and additionally serving as back-lit for the keyboard. The behavior of the individual keys is fully configurable in the EMU Black or PMU client software.
Connector Set EMU - ECUMaster
The connectors are there to install easily and quickly the EMU.
DBW Module - ECUMaster
DBW Module is used to operate the electronic throttle device of the EMU
Haldex Drag Controller - ECUMaster
Haldex Drag Racing Controller is an essential device for every competitor using a car equipped with a Haldex 4Motion system in drag racing.
CAN Switchboard - ECUMaster
A CAN switchboard is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches, and indicators.
