Produits taggés avec 'valve springs'

Toyota 4AGE 16v Single Spring/Titanium Retainer Kit

GSC Power-Division Single Valve Spring and Ti Retainer Kit Gen3 3SGTE

SHIM UNDER VALVE TAPPET ONLY

• 70lbs @ 1.354" install height 
• 188lbs @ 0.945" 

GSC Power-Division Valve Spring kit with Titanium Retainers for Gen2 3SGTE using shim over bucket or shimless buckets. This new spring kit uses a round wire, cylindrical Nano-peened spring that drops right in with the OEM locator.

SHIM OVER/SHIMLESS VALVE TAPPET ONLY

• 73lbs @ 1.345" install height 
• 190lbs @ 0.936"

CONICAL Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ

24 titanium retainers and 24 conical valve springs

GSC Power-Division CONICAL High-Pressure Valve Spring with Ti Retainer for the Toyota 2JZ & 1JZ (SEE SPECS)

RACE ONLY

• 105lbs @ 1.316" install height 
• 253lbs @ 0.869"

GSC Power-Division CONICAL Valve Spring with Ti Retainer for Toyota 3SGTE

For shimless/shim-over valve tappet

• 90lbs @ 1.300" install height 
• 225lbs @ 0.891"

GSC Power-Division CONICAL Valve Spring with Ti Retainer for Toyota 3SGTE

For shimless/shim-over valve tappet

• 90lbs @ 1.300" install height 
• 225lbs @ 0.891"

83lb at 30.40mm installed height. 10.50mm max lift.

Nissan RB20DET / RB25DET Engine Valve Springs

Pre-NVCS. 85lb seat pressure @ 36.0mm install height.

102lb seat pressure at 39.8mm installed height. 293lb at 13.7mm valve lift.

Installed pressure is 80lb at 39mm. Coil bind is 25.5mm