An engine control unit (ECU) is an electronic control unit that manages the engine of a vehicle.
It receives input from sensors on the engine and vehicle, and uses that data to control various systems such as fuel injection, ignition timing, and emissions control.
Here you can find: knock sensors, acceleration sensors, IGBT drivers, PMW module kits, WBO modules, ecu's, lambda sensors, battery isolators, crimping tools and mounting brackets.
Wheelspeed To Can Module - ECUMaster
The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS.
CAN IR Temperature Camera - ECUMaster
New thermal cameras, delivering real-time, precise contactless temperature readings. Measured data is sent over CAN BUS and can be recorded and displayed by other devices (e.g. ADU)
Dual H-Bridge - ECUMaster
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Digital Gear Display - ECUMaster
The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional) shift light - these two pieces of information are the most important for racing drives.
Battery Isolator M8 Ring Terminal - ECUMaster
Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown.
