An engine control unit (ECU) is an electronic control unit that manages the engine of a vehicle.
It receives input from sensors on the engine and vehicle, and uses that data to control various systems such as fuel injection, ignition timing, and emissions control.
Here you can find: knock sensors, acceleration sensors, IGBT drivers, PMW module kits, WBO modules, ecu's, lambda sensors, battery isolators, crimping tools and mounting brackets.
MicroUSB charger for cable installation (5V/3A) - MaxxECU
MicroUSB charger for cable installation (5V/3A)
USB Tuning Cable ‐ ECU to USB (CUSB) - Link
Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.
Intake temperature sensor (IAT) HV 1/8 NPT - MaxxECU
Intake temperature sensor (IAT) HV 1/8 NPT
Air Temperature Sensor which uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with a blue insulating lacquer.
Liquid pressure and temperature sensor (10bar / 140 deg C) - MaxxECU
Liquid pressure and temperature sensor (10bar / 140 deg C)
M10x1.0 thread.
- pin2: Pressure signal out (0.5V = 0bar, 4.5V = 10bar)
- pin3: +5V sensor supply
- pin4: Sensor GND
- pin5: Temperature signal out (0.5V = -40 deg C, 4.5V = 140 deg C)
MaxxECU SPORT
Extremely versatile engine control system for powerful engines with up to 6 sequential cylinders. Up to 12 cylinders in wasted spark. Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost
Get into the advanced tuning with functions such as built-in E-throttle with a superfast Cortex M3 CPU and Bluetooth connectivity
For more information, check the info charts below.
MaxxECU STREET ECU
Advanced entry-level engine control system for up to 6 sequential cylinders. Up to 12 in wasted spark.Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost.
Get started faster with the easy-to-use MTune PC-software
For more information, check the info charts below.
MaxxECU MINI ECU
Advanced entry-level engine control system for up to 4 sequential cylinders. Up to 8 in wasted spark. Faster and easier tuning with the built-in MAP-sensor up to 3 bar / 43.5 psi of boost.
Get started faster with the easy-to-use MTune PC-software
For more information, check the info charts below.
MaxxECU PRO ECU
For tuning masterminds working with racing professionals looking for the most advanced engine control system, this is it on the track, winning or losing comes down to details. That’s why MaxxECU PRO can access just about any information - Tune to perfection
Includes our easy-to-use MTune software for intuitive tuning, and real-time monitoring/control with our wireless MDash Android app.
For more information, check the info charts below.
MaxxECU RACE / RACE H2O ECU
Extremely versatile engine control system for powerful engines with up to 8 sequential cylinders. Up to 12 in wasted spark
Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost. Get into serious tuning with advanced functions such as built-in E-throttle, 8 EGT, knock sensor inputs and superfast Cortex M3 CPU
For more information, check the info charts below.
Exhaust gas temperature sensor 1.8m 6.35mm (without connector) - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. 1/8 NPT.
Exhaust gas temperature sensor 1.8m 4.7mm covered tip - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.
