Electronics & Wiring
Check out our range of: engine control units, boost controllers, digital dash displays, gauges, ABS and traction control, power management, ignition, switches, relays, wiring and harness building, electrical tools, waterpumps, ecu harnesses adapters and connectors.
Haldex Drag Controller - ECUMaster
Haldex Drag Racing Controller is an essential device for every competitor using a car equipped with a Haldex 4Motion system in drag racing.
CAN Switchboard - ECUMaster
A CAN switchboard is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the device has 4 built-in low side outputs that can be activated with a CAN bus message. The main purpose of this board is to build custom steering wheel panels containing buttons, rotary switches, and indicators.
Wheelspeed To Can Module - ECUMaster
The Wheel Speed To CAN device is designed to measure frequency-type signals from 4 separate sensors and send that data over CAN BUS.
CAN IR Temperature Camera - ECUMaster
New thermal cameras, delivering real-time, precise contactless temperature readings. Measured data is sent over CAN BUS and can be recorded and displayed by other devices (e.g. ADU)
Dual H-Bridge - ECUMaster
The CAN H-Bridge device contains two independent H-Bridges with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages.
Digital Gear Display - ECUMaster
The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional) shift light - these two pieces of information are the most important for racing drives.
Battery Isolator M8 Ring Terminal - ECUMaster
Ecumaster Battery Isolator is a motorsport master relay device designed for FIA compliant battery isolation and engine shutdown.
Filter by:
Clear All