Take a look at our range of: knock sensors, connector socket housings, acceleration sensors, IGBT drivers, module kits, pressure sensors, gear displays, cables, keypad icons and CMC removal tools.
Straight K-type Thermocouple EGT Sensor - CBS Racing
Straight K-type Thermocouple EGT - CBS Racing
90 degree K-type thermocouple EGT sensor - CBS Racing
90-degree K-type thermocouple EGT sensor
Exhaust gas temperature kit for MaxxECU MINI / STREET / SPORT - MaxxECU
Includes both sensor and electronics for outputting 0-5v signal.
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.
Exhaust gas temperature sensor 1.1m 4.7mm (without connector) - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.1m cable. 1/8 NPT.
Exhaust gas temperature sensor 1.8m 4.7mm - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.
Exhaust gas temperature sensor 1.8m 4.7mm covered tip - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.
Exhaust gas temperature sensor 1.8m 6.35mm (without connector) - MaxxECU
Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. 1/8 NPT.
Liquid pressure and temperature sensor (10bar / 140 deg C) - MaxxECU
Liquid pressure and temperature sensor (10bar / 140 deg C)
M10x1.0 thread.
- pin2: Pressure signal out (0.5V = 0bar, 4.5V = 10bar)
- pin3: +5V sensor supply
- pin4: Sensor GND
- pin5: Temperature signal out (0.5V = -40 deg C, 4.5V = 140 deg C)
Intake temperature sensor (IAT) HV 1/8 NPT - MaxxECU
Intake temperature sensor (IAT) HV 1/8 NPT
Air Temperature Sensor which uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with a blue insulating lacquer.
USB Tuning Cable ‐ ECU to USB (CUSB) - Link
Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.