Turbos & Forced Induction
Are you looking to boost the performance of your vehicle?
We offer turbos for a variety of makes and models.
If you need turbos, turbine housings, cores, setup springs, blow-off valves, vacuum tubing, V-band clamps, and all other related hardware you came to the right place.
3.0" V-Band Flange-Kit for Stainless Steel Turbine Housings
3'' V-Band Flange Kit for the Outlet at Stainless Steel Turbine Housings to the Downpipe
- 3.00" (76mm)
- GT / GTX and others
Downpipe Flange AIRWERKS S200 / S300
3.5'' V-Band Downpipe Flange for Turbine Housing with the "4.21 Marmon" outlet
- 3.50" (89mm)
- S200, S300 with the "4.21 Marmon" outlet
- Includes: Stainless steel weld flange
Downpipe-Kit AIRWERKS S200 / S300
Downpipe-Kit AIRWERKS S200 / S300
3.5'' V-Band Downpipe-Kit for Turbine Housing with the "4.21 Marmon" outlet
- 3.50" (89mm)
- S200, S300 with the "4.21 Marmon" outlet
- Includes: Stainless steel weld flange and V-Band
GT30 GTX35 5-Hole Flange V-band Adapter
High-quality cast welding flange for 5-hole Garrett GT / GTX housing
- Size: GT30 GT35 GTX30 GTX35
- 3 "/ 76mm V-band connection
GTW Stainless Steel Welding Flange for Downpipe
GTW Stainless Steel Welding Flange for Downpipe
- Size: GTW T3 Turbine Outlet
- Material: SS 304
- For M8
- Downpipe: 63,5mm (2.5'')
T25 Stainless Steel Welding Flange
High-quality investment cast stainless steel weld-on flange
T3 V-Band Adapter Flange Stainless
High-quality investment cast stainless steel adapter flange for the assembly of turbochargers with V-band exhaust housing on exhaust manifold with T3 flange.
- Size: T3/V-Band Garrett
- Material: Stainless 1.4848 for 1050°C
- Holes: 8mm
- Building height: approx 27mm
T4 Stainless Steel - Welding Flange T4200s 2.0" Single
T4200s 2.0 ”Single - High-quality T4 Billet Stainless Steel Weld-on flange.
Insert the appropriate pipe end and weld. The new billet design means that there is little or no distortion during welding. You get a perfect transition to the manifold and a noble design.
- Size: T4
- Material: 304 stainless steel
- Threaded holes: M10
- Material thickness flange: approx. 12mm
- Pipe connection: 2 inches
- Hole spacing: approx. 82.5 X 70mm
Universal 3.0" Inch V-band Flange
3'' V-band flange for turbine housing outlet to Y-pipe
- 3.0" (76mm)
- GT / GTX and others
V-Band Flange Stainless GT28 GTX28 Inlet Garrett
Stainless Steel V-Band Flange for inlet at Garrett GT28 GTX28 Turbine Housings
- Stainless Steel
- Perfect fit for GT28 GTX28
V-Band Flange-Kit Inlet for Stainless Steel Turbine Housings
- GT / GTX and others
GT/GTX28 - 2.59" V-Band Clamp Garrett
V-band for Garrett GT / GTX (28) turbocharger at the turbine housing inlet
- 2.590" (63,5mm)
- GT / GTX 28
Filter by:
Clear All