Engine & Powertrain

GSC Power-Division Viton Valve Stem Seals for the Toyota 3S-GTE 6mm valve stem
Sold as a set of 16

GSC Power-Division Beehive Valve Spring Kit with Ti Retainer for the Toyota 2JZ

• 82 lbs @ 1.360" install height
• 218lbs @ 0.947" 

*****MAY NOT FIT ALL VVTi and NON TURBO HEADS***** check for proper fitment of the spring seat base during install.
May require GSC5064, GSC5066, or GSC5744 spring kit for proper fitment of non 2jzgte heads

GSC Power-Division Single Spring with Ti Retainer Kit for the Toyota 2JZ & 1JZ 

This is a great spring kit for the daily driver with an S1 or S2 cam profile that keeps the boost and revs below 32 psi and 8,500 RPM.

• 80lbs @ 1.320" install height 
• 239lbs @ 0.930" 

• 24 titanium retainers and 24 cylindrical valve springs.

GSC Power-Division Dual Valve Spring Kit with Titanium Retainer for Toyota 2JZ Platform

• 125lbs @ 1.258" install height 
• 254lbs @ 0.811"

Includes 24 titanium retainers, 24 dual valve spring sets, 24 inner valve spring seats, and 24 outer valve spring seats. 

The R2 cams are designed for those running large single turbos, larger than 76mm. These cams will not have bottom end losses over our S2 cams; nothing but gains will be seen and will promote great peak power gains. Designed for a rev range of 4500-9000 RPMs. 

This core is rated to 1,260hp with dimensions 706mm x  324mm x 130mm

Speed Sensor Profi Kit for G-Series Turbocharger
Display range: 0 - 180.000 rpm

Toyota 1JZ Valves - Set/12
***Read below for more info.***

Spring Seat - (Toyota 2JZGTE/GE, 1JZGTE)

Valve Springs for Toyota 2JZ

24 pcs. Springs only

***Read below for info.***

H-Beam 2JZ Con.Rod Set - 6pcs

More info below

A-Beam 1NZ-FE Con.Rod Set - 4pcs

More info below