Engine & Powertrain

Dual Catch Can Kit, 02-21 Subaru EJ Turbo 

This kit contains two independent catch cans, each plumbed into different parts of the PCV system. The cans do NOT vent to atmosphere (VTA), and instead maintain the factory plumbing strategy. This closed-loop system routes clean filtered air back in through the engine promoting negative crankcase pressure for optimal performance. Furthermore, closed loop systems prevent unwanted oil vapors from being detected in the cabin.

FDP Diaphragm Service Replacement

This is a diaphragm service replacement for the following products:

RADIUM FPD-R (fuel pulse damper, range)
RADIUM FPD-XR (fuel pulse damper, extra range) 

Catch Can Kit, BMW E46 3-Series, All

Catch Can Kit, BMW 335I/135I N54

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This oil catch can kit is compatible with all BMW 135i, 335i, and 535i models with the 3.0L twin-turbo N54 engine.

Air Oil Separator-Return (AOS-R) Kit, FR-S/BRZ/86

Air Filter, 0.75in ID

The Radium Engineering 18-0042 air filter is commonly used for venting engine crankcase vapors, fuel cells, etc. It is compatible with a 3/4" (19mm) barbed nipple. 

8AN Dry Break 27mm Set

When separating two hoses, dry break fittings permit a leak-free disengagement while retaining pressure. Radium dry break couplers use a bayonet style lock that will not leak when disconnected nor introduce air upon reconnection. 

6AN Dry Break 27mm Set

6AN Dry Break Coupler 27mm Fitting, Inner

3AN Vacuum Port Adapter

Black zinc-plated 10-32 thread to 3AN adapter machined from high strength steel.

2pc Clamp, 60mm, Single

These bright dipped anodized billet 6061 aluminum clamp-style mounting brackets were designed for components such as fuel filters, oil catch cans, external fuel pumps, etc. The large inner diameter(s) measure 60mm which matches a Radium Fuel Filter and/or Bosch 0 580 254 044 fuel pump(s). 

2pc Clamp, 60mm, Dual 

These bright dipped anodized billet 6061 aluminum clamp-style mounting brackets were designed for components such as fuel filters, oil catch cans, external fuel pumps, etc. The large inner diameter(s) measure 60mm which matches a Radium Fuel Filter and/or Bosch 0 580 254 044 fuel pump(s).