Take a look at our range of: knock sensors, connector socket housings, acceleration sensors, IGBT drivers, module kits, pressure sensors, gear displays, cables, keypad icons and CMC removal tools.
Liquid pressure and temperature sensor (10bar / 140 deg C) - MaxxECU
Liquid pressure and temperature sensor (10bar / 140 deg C)
M10x1.0 thread.
- pin2: Pressure signal out (0.5V = 0bar, 4.5V = 10bar)
- pin3: +5V sensor supply
- pin4: Sensor GND
- pin5: Temperature signal out (0.5V = -40 deg C, 4.5V = 140 deg C)
Intake temperature sensor (IAT) HV 1/8 NPT - MaxxECU
Intake temperature sensor (IAT) HV 1/8 NPT
Air Temperature Sensor which uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with a blue insulating lacquer.
USB Tuning Cable ‐ ECU to USB (CUSB) - Link
Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available.
MicroUSB charger for cable installation (5V/3A) - MaxxECU
MicroUSB charger for cable installation (5V/3A)
MaxxECU Bluetooth mobile antenna - MaxxECU
MaxxECU Bluetooth mobile antenna
Included with MaxxECU packets by default, but are available as accessories.
CANJST - Link CAN Connection Cable for G4X/G4+ Plug-in ECU’s (CANJST) - Link
CANJST - Link CAN Connection Cable for G4X/G4+ Plug-in ECU’s
CANSS - CAN Connection Cable for G4X/G4+ WireIn ECU’s (ECU Header CAN) (CANSS) - Link
CANSS - CAN Connection Cable for G4X/G4+ WireIn ECU’s (ECU Header CAN)
CANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN) (CANLTW) - Link
CANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN)
CANEXT - Link CAN Extension Cable 2m (CANEXT) - Link
2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.
