Fuel System

2pc Clamp, 60mm, Single

These bright dipped anodized billet 6061 aluminum clamp-style mounting brackets were designed for components such as fuel filters, oil catch cans, external fuel pumps, etc. The large inner diameter(s) measure 60mm which matches a Radium Fuel Filter and/or Bosch 0 580 254 044 fuel pump(s). 

2pc Clamp, 60mm, Dual 

These bright dipped anodized billet 6061 aluminum clamp-style mounting brackets were designed for components such as fuel filters, oil catch cans, external fuel pumps, etc. The large inner diameter(s) measure 60mm which matches a Radium Fuel Filter and/or Bosch 0 580 254 044 fuel pump(s). 

1pc Clamp, 60mm, Heat Exchanger

Venturi Jet Pump Kit

The Radium Engineering Jet Pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi creates vacuum in the perpendicular port.

Fuel Level Switch Plus Diagnostic Indicator

This kit combines Fuel Level Switch, 1/8 NPT with the Fuel Level Diagnostic Indicator.

This allows flexibility when plumbing a fuel system using multiple Bosch pumps. NOTE: this kit eliminates the Bosch check valves. The pumps can NOT be staged.

Fuel Level Switch, 1/8 Npt

This switch is only compatible with the Radium Multi-Pump Fuel Surge Tanks (MPFST) and the Radium Fuel Cell Surge Tanks (FCST).  Both of these products have specially machined ports that are labeled "Level Switch".

Fuel Level Diagnostic Indicator

Fuel Level Diagnostic Indicator can be used as a visual reference for fuel level.

Split-Flow Flex Fuel Sensor Adapter 

A duckbill is a one-way valve. They prevent aeration, and reduce fuel slosh noise, and are commonly used on the return hose inside fuel tanks to prohibit fuel backflow for fire safety.