Take a look at our range of: knock sensors, connector socket housings, acceleration sensors, IGBT drivers, module kits, pressure sensors, gear displays, cables, keypad icons and CMC removal tools.
EDL-1 Datalogger - ECUMaster
THE DATALOGGER for EMU CLASSIC and EMU BLACK is capable of recording all log channels (the same as on PC) with 25Hz on SDHC card (4GB or bigger required)
Points to note with our logger is that it is capable of recording 11 hours data per 1GB.
8X EGT CAN BUS Module - ECUMaster
With this module, it is possible to connect 8 exhaust gas temperature sensors with Can Bus with the Ecumaster EMU.
This module is connected true the Can Bus communication port.
Bluetooth CAN BUS Module - ECUMaster
Wireless communication module to connect with mobile phones to ECU MASTER EMU.
With this Bluetooth module, it's possible to connect your mobile or tablet device to the ECU MASTER EMU.
Only compatible with Android.
This module is connected true the Can Bus communication port.
Bluetooth Module - ECUMaster
Wireless communication module to connect with mobile phones to ECUMASTER EMU.
With this Bluetooth module, it's possible to connect your mobile or tablet device to the ECUMASTER EMU.
Only compatible with Android.
USB Cable - ECUMaster
USB 2.0 communication cable 1,8 m long
Connect the Ecumaster EMU and Det 3 with a pc
Digital Ecu Tuner 3 - ECUMaster
Digital ECU Tuner 3 is the most popular device as a "piggyback" unit on the market. Due to its many features and cost-friendly price, this product has gained a large group of satisfied customers and becoming one of the most purchased piggyback units in the UK.
Battery Isolator - ECU Master
Ecumaster Battery Isolator is a motorsport master relay device designed for FIAcompliant battery isolation and engine shutdown.
The device is designed for harsh motorsport environments and weighs only 83g. Featuring a full solid-state design, an absence of mechanical components ensures long life and high reliability.
USB to CAN - ECU Master
The ECUMASTER USBtoCAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It is equipped with a LED status diode for fast diagnostic and a 120 Ohm terminator that can be switched on or off to relieve the user from applying external terminators.
This device is used to communicate with the PMU.
A version with galvanic isolation is also available.
MaxxECU WBO module (including LSU 4.2 sensor)
MaxxECU WBO module (including LSU 4.2 sensor)
![Billede af BMW M3 E92/E93 06-13 (No EDC) BC-Racing Coilover Kit [HM]](https://www.cbsracingshop.com/images/thumbs/044/0449482_bc-racing-hm-series-hero_64.jpeg "Vis detaljer for BMW M3 E92/E93 06-13 (No EDC) BC-Racing Coilover Kit [HM]")
